What mould and damp treatment includes
- Checking the ceiling and corners with a thermal camera and electronic instruments, without breaking anything
- Identifying the damp source feeding the mould: a leak, condensation or damp from outside
- Checking the slab and the neighbouring wall to trace the damp path to its true origin
- Treating the damp location after its cause is identified, to cut the supply feeding the mould
- Cleaning the mould marks and treating the affected surface after it is confirmed dry
- Handing over a certified report after inspection stating the source and its cause
From your call to treating the cause
- 1
Tell us what you see
Call or message us on WhatsApp and describe where the mould or patch is, whether it returns after cleaning, and when you first noticed it.
- 2
We inspect with instruments
We use a thermal camera and electronic detectors to find hidden damp in the ceiling or wall, without breaking anything.
- 3
We identify the source
We tell a leak from above the ceiling apart from condensation or damp entering from outside, because each source calls for a different treatment.
- 4
We treat and hand you the report
We treat the damp source and give you a certified report after inspection stating the location and cause of the leak.
The cause is known before we start
- We find the damp source with instruments, without breaking anything
- We tell a leak apart from condensation and damp from outside
- We treat ceilings, corners and wherever damp gathers
- Certified report after inspection with the source and its cause
- We take your request by phone call or WhatsApp message
The service in At Tuhaymiyah
In a small settlement like At Tuhaymiyah, where homes are close together and the ground is usually damp and salty, damp and mould are common in lower floors. Water rises from the soil through the foundation, and salt stays in the walls and traps moisture, causing repeated mould. Black mould spots may appear, white salt patches, or cracks in the wall. The team checks the foundation, lower and outer walls, identifies water and salt levels, and chooses the solution: waterproofing the foundation and lower walls, mending cracks and joints, or treating salt and damp with specialist products that draw out moisture and protect the wall.
At Tuhaymiyah is a small settlement in Al-Ahsa governorate in the Eastern Province, close to Al 'Uthmaniyah, Udhailiyah and Imam Muhammed Ibn Saud Islamic University District.
Salt and rising damp from the ground are the main cause of mould in homes in At Tuhaymiyah and surrounding villages.
Our portfolio
What our customers say
- ★★★★★
شغلهم كويس وناس ممتازه في اسرع وقت
- ★★★★★
شكرا على التواصل السريع
- ★★★★★
شركه ممتازه واشتغلنا معاهم اكثر من مره وجود عاليه ما شاء الله بارك الله فيهم واعمله
Reviews are shown as the customers wrote them, in Arabic.
Questions about Mould & damp treatment in At Tuhaymiyah
Because cleaning removes what is on the surface but not the damp behind it. As long as the surface stays wet from a leak, repeated condensation or damp coming from outside, mould will return. Treating the source is what stops it coming back.
No. Condensation building up on a cold surface causes mould just as a leak does. Damp may also reach the ceiling from a nearby wall or from the concrete slab. Inspection with instruments is what answers the question.
If the corner is damp because of an ongoing source, an anti-mould product slows the growth for a time but does not solve the problem. Mould that keeps returning in a ceiling corner or between two walls is worth inspecting to find out whether a leak or a damp path is feeding it.
Mould from the roof usually appears in areas exposed to rainwater or near drain outlets, and it gets worse after the rain season. Mould from condensation tends to appear in corners and on cold surfaces away from the ceiling edge. Inspection with instruments separates the two.
Tell us exactly where the mould is, whether it is on the ceiling, in a wall corner or both, and whether it returns after cleaning. Tell us whether you noticed any wet patch before it appeared, and whether the room is on the top floor or a middle floor. The more precisely you describe the location and the order in which the mould appeared, the more directly we can aim the inspection at the most likely source.
Yes, salt and mould together indicate rising damp from the soil. Salt comes out with rising water and settles in the wall, and moisture causes mould. Damp and salt must be treated together to stop the damage.
Say which floor shows damp and mould, which wall (outer or inner), whether you see white salt or black mould or both, and whether the wall is close to ground or raised. Send clear photos on WhatsApp to show how far the problem spreads.
Mould & damp treatment in nearby areas
