From your call to the repair
- 1
Describe what you see
Call or WhatsApp us and tell us where the damp or the mark appears, and whether it shows after rain, constantly or after water is used.
- 2
We find the source
We check the area and find whether the water comes from a crack, a joint, a pipe or an unprotected surface, then we begin the right treatment.
- 3
We treat the source
Treatment differs by source: a crack in concrete is filled or injected, an open joint is sealed, and an exposed surface is waterproofed after proper preparation.
- 4
We treat the mark
After the source, dampness and salts in the affected wall or ceiling are treated, because leaving the mark untreated keeps the damage and weakens the wall.
The source is found, then treated
- We check the water source before any repair
- We treat cracks, joints and exposed surfaces
- We treat dampness and salts in affected walls
- We take your request by phone call or WhatsApp message
- We explain clearly what we found and what we treated
The service in Ash Shi’bah
Homes and villas in a district like Ash Shi'bah usually have water tanks on the roof and pipes spread through walls, floors, bathrooms, kitchens and stairs. Slowly leaking water carries soil salt to lower walls, causing damp and white stains. Inspection starts by viewing the stains and traces water toward its source: roof cracks, a buried water pipe, or a wall absorbing moisture from below. The technician then chooses the right solution: repair the pipe, seal the crack, or treat the wall for salt and damp.
Ash Shi'bah is a district in Al-Ahsa governorate in the Eastern Province, close to Al Qurayn, Julayjilah and Ash Shuqayq.
Inspection focuses on cracks in joints between pipes and walls and hidden damp under floors and lower walls.
Our portfolio
What our customers say
- ★★★★★
شغلهم نظيف وسريعين ومحترمين الله يعطيهم العافيه
- ★★★★★
شركة ممتازة تستحق التعامل معها بشكل مستمر
- ★★★★★
ممتاز والخدمة ان شاء الله تكون قد التوقعات
Reviews are shown as the customers wrote them, in Arabic.
Questions about Leak repair & treatment in Ash Shi’bah
Leak repair means stopping the water that is entering now, by treating the source such as a crack, a joint or a pipe. Surface waterproofing is a protective layer that prevents water from entering in future. Often the work needs both: you stop the leak first, then waterproof the surface to keep it protected.
Repairing without knowing the source treats the visible mark, not the water itself, so the leak returns from the same place or nearby. That is why detection is a necessary step before any treatment, not an optional one. A wall that looks dry outside may hide a continuing leak inside.
A wall is usually not the source itself. The water reaches it from somewhere else: an unprotected surface above, a crack in the concrete, a joint between the wall and the ceiling, or a buried pipe inside it. Dampness that appears on a wall needs to be traced upwards or inwards to its source.
We treat leaks in roofs, walls, cracks and joints, and we treat dampness and salts in walls, and leaks in pools, tanks and septic tanks. Each case determines its own treatment method according to the source, the material and the location.
A small crack may be only on the surface of the paint, or it may go into the concrete and let water in. The difference shows from the crack's depth, its width and whether dampness accompanies it. A crack that comes with wetness or white salts on the wall is worth checking before it is left.
Condensation appears on cold surfaces in humid weather and disappears when the air dries; it is usually on the surface of the wall, not inside it. A leak stays and returns after wiping, and is often accompanied by a colour change in the wall, white salts or peeling paint. If dampness returns in a fixed spot after wiping, it is most likely a leak.
Tell us where the mark is in the home, whether it appears after rain, after water is used or constantly, and whether you see cracks or white salts near the spot. The clearer your description, the easier it is to decide the right treatment.
A pipe leak shows a stain on a wall or floor near the pipe route, usually in the bathroom, kitchen or stairs. A roof leak shows on the ceiling and top floor, especially after rain. The technician identifies the type through careful inspection and instruments.
Say exactly where the stain is and which floor, whether it is near the bathroom, kitchen or under stairs, whether it worsens when water is used or happens all the time, and a photo on WhatsApp clarifies the location greatly.
