Al Raya
Pool renovation in Ibn Dihman: An empty old pool with worn plaster and cracks and removed tiles at its edge

Pool renovation in Ibn Dihman

Pool renovation in Ibn Dihman addresses repeated cracks and leaks that patching will not stop. Al Raya strengthens the floor and walls together, seals joints and corners, and the pool becomes safe and fit for use again.

What the service includes

What pool renovation includes

  • Emptying the pool and inspecting the full shell: walls, floor and edges
  • Locating cracks, areas of tile separation and points of water loss
  • Repairing cracks in the concrete shell and treating the surrounding area
  • Renewing tile joints or replacing broken and separated tiles
  • Preparing the surface and applying new lining, plaster or epoxy
  • Filling the pool and checking for water loss once renovation is complete
How we work

From your call to a renewed pool

  1. 1

    Describe what you see

    Call or WhatsApp us and tell us about the pool surface: visible cracks, separated tiles, water loss or worn plaster.

  2. 2

    Empty and inspect the shell

    The pool is emptied to expose the full shell, then the walls, floor and edges are checked to locate every crack and every area of damp before work starts.

  3. 3

    Repair the shell and joints

    Cracks are filled and the surrounding area treated, damaged tile joints are renewed or broken tiles replaced, and the surface is treated with the appropriate material before lining.

  4. 4

    Line and test the pool

    Once the surface is ready, the new lining, plaster or epoxy is applied according to the shell type, the pool is filled and checked for water loss.

Why Al Raya

Sound renovation starts from the shell

  • We inspect the full shell before any new layer
  • Treating cracks and joints is essential before any new surface
  • We use epoxy and plaster according to the surface type
  • We take your request by phone call or WhatsApp message
  • The cost depends on the pool's condition and size
About the area

The service in Ibn Dihman

Private pools in small settlements like Ibn Dihman usually face constant pressure from water, high heat, and salts in the water and surrounding soil. Cracks appear first at the floor and around corners, then spread through the walls. If cracks return to the same place, the concrete needs real strengthening, not quick patching. Renovation includes checking the entire pool, treating cracks deeply, and sealing joints with waterproof materials.

Ibn Dihman is a small settlement in Al-Ahsa governorate in the Eastern Province, close to Muraytibah, Sudah and Al Jishshah.

Joints between the pool walls and floor are where water first begins to leak.

Read about Pool renovation

Our work

Our portfolio

  • Cracked and bubbling paint along a wall edge
  • A white roof with an air conditioner and satellite dishes
  • A leak detection device with headphones in a case
  • The edge of a roof insulated in white beside a building under a clear sky
  • A roof covered in a smooth white insulation layer with a small dome behind it
  • A hole in a broken wall exposing pipes and wires
Reviews

What our customers say

  • ★★★★★

    شكرا على التواصل وصلو في اسرع وقت ممكن

  • ★★★★★

    شغلهم ميه ميه يشكرو عليه

  • ★★★★★

    شغلهم كويس وناس ممتازه في اسرع وقت

Reviews are shown as the customers wrote them, in Arabic.

Questions

Questions about Pool renovation in Ibn Dihman

Patching treats a single crack without looking at the whole shell, and it is right when the problem is limited and recent. Renovation means emptying the pool, inspecting the full shell and repairing all cracks and joints before a new surface is applied. When cracks return or the pool loses water in several places, renovation is the right choice.

Yes, full emptying is necessary. The shell cannot be inspected, cracks repaired or the surface prepared while it is under water. Emptying is what first lets you see the real problems in the walls, floor and edges, and without it any repair stays incomplete.

The material depends on the shell condition and surface type. Plaster is the traditional layer that lines a concrete shell. Epoxy is a hard resin applied over a prepared surface and resists moisture. Polyurethane foam is a sprayed foam layer used for thermal and waterproofing work. The choice between these materials depends on assessing the pool's condition.

Yes, re-tiling is part of renovation when tiles are broken or have separated from the wall. Separated tiles usually point to a problem in the joints or the layer behind them, so that layer is treated first before new tiles are laid, otherwise the new tiles will separate in turn.

Tell us the pool's approximate age and describe the current surface: whether the plaster is worn or cracked, whether tiles are separated or broken, and whether you have noticed the water level dropping. The clearer your description, the better we can identify what is needed before the visit.

If cracks return, the concrete under the crack is weak or the joint was not sealed tightly. Full renovation solves the problem by strengthening the concrete and protecting the joints.

Tell them how long the pool has been there and where cracks appear, whether water leaks from a specific spot, and send a clear photo of the cracks on WhatsApp.

Nearby areas

Pool renovation in nearby areas

Sunset over villa roofs and palm trees

Describe your pool to us

Call or WhatsApp us and tell us what you see on the surface and walls.

Call nowWhatsApp