Cementitious pool waterproofing in As Sunaidah District
In As Sunaidah District, concrete pools need protection from water absorption and the cracks that develop with use. Al Raya coats the concrete with a flexible cementitious layer that stops water entering, whether or not tiles are in place.
What cementitious pool waterproofing includes
- Checking the pool walls and floor and identifying the cracks and joints that need treatment before coating
- Treating cracks and joints with suitable materials before the cementitious coat is applied
- Cleaning and preparing the surface so the cementitious coat bonds properly with the concrete
- Applying the flexible cementitious coat to the walls, floor and pool edges
- Sealing around pipe entries and penetrations through the concrete shell
- Finishing the surface after the coat is complete so it is ready for tiling or direct use
From your call to a finished coat
- 1
Describe the pool to us
Call or message us on WhatsApp and tell us whether the pool is new or in use, whether it has tiles, and where you notice the problem.
- 2
Checking the surface and weak points
The work begins by checking the walls, floor, joints and pipe openings, because preparing every weak point is a condition for the coat to hold.
- 3
Treating cracks and preparing the surface
Cracks and joints are treated before coating, and the surface is cleaned and dampened correctly, because a cementitious coat needs clean, moist concrete that is not saturated.
- 4
Applying the cementitious coat
The coat is applied to the walls, floor, pool edges and around every entry and exit point, with particular attention to the corners and joints where weakness concentrates.
A prepared surface does not let the coat down
- A coat that penetrates the concrete pores and bonds with them
- Cracks and joints treated before the coating, not after
- Suited to walls, floor and the area around pipe openings
- Accepts tiling on top once the coat is complete
- We take your request by phone call or WhatsApp message
The service in As Sunaidah District
Pools in a district like As Sunaidah are usually built from exposed concrete, which absorbs water and lets it pass into the ground. Fine cracks in the pool floor and walls appear with seasonal movement and the constant pressure of water, and in Al-Ahsa where the ground is often damp and salty, this gets worse. The concrete is checked first at every corner, joint and edge, then the surface is prepared by removing tiles if needed or cleaning the concrete, and coated with the flexible cementitious layer. The first inspection decides whether there are wide cracks or current leaks that need other treatment before coating.
As Sunaidah District is a district in Al-Ahsa governorate in the Eastern Province, close to Munifah District, Ar Rafiah District and Al Marbidia District.
The pool floor and inner corners are where leaks first show, because water sits there and seeps through fine cracks.
Our portfolio
What our customers say
- ★★★★★
شغلهم نظيف وسريعين ومحترمين الله يعطيهم العافيه
- ★★★★★
شركة ممتازة تستحق التعامل معها بشكل مستمر
- ★★★★★
ممتاز والخدمة ان شاء الله تكون قد التوقعات
Reviews are shown as the customers wrote them, in Arabic.
Questions about Cementitious pool waterproofing in As Sunaidah District
It suits many cases, but the cracks need individual treatment before the general coat. A cementitious coat alone does not fill a deep crack, so the first step is to assess each crack and decide how to treat it, then apply the coat after the surface is ready.
Yes, and that is one of the main advantages of this system. The cementitious coat is compatible with standard pool tile adhesives, and the tiles go on once the coat is complete and the surface is ready. That is what makes it the common choice for new pools.
A standard cementitious coat is rigid and may crack when the concrete expands or contracts with temperature change. The flexible type contains polymers that allow the coat to absorb surface movement without cracking. In pools exposed to temperature variation, as is usual, the flexible type is often the better fit.
Common signs are tiles that lift or separate from the surface, damp appearing on the outer pool wall or the surrounding floor, and a noticeable water-level drop not explained by evaporation alone. These signs together usually point to a problem in the waterproof layer rather than in the tiles themselves.
A cementitious coat can hold for a long time when it is applied to a well-prepared surface with cracks and joints treated beforehand. New cracking in the concrete or wear in areas of heavy contact may need those spots treated again. Checking the surface periodically reveals areas that need attention before a leak appears.
The tiles and mortar are checked; if they are sound and firmly stuck they may stay, but if they are loose or the concrete underneath is weak, they are removed before coating to prepare the surface properly.
Say when the pool was built and whether you have seen water leaking from the floor or walls, whether there are damp patches outside the pool, and send photos of the pool and ground around its base if you can.
More services in As Sunaidah District
Cementitious pool waterproofing in nearby areas
