What bathroom floor waterproofing includes
- Checking the fall of the floor towards the drain and the condition of the base before starting
- Cleaning the surface, closing cracks and preparing the base before any layer is applied
- Waterproofing the full floor area with a layer suited to a wet environment
- Raising the waterproof layer up the walls to a sufficient height at the junctions and corners
- Special treatment at the drain and the door threshold to seal the points of interruption
- Ensuring the wall-floor junction is covered along the full perimeter of the bathroom
From your call to a sealed floor
- 1
Tell us what you see
Call or message us on WhatsApp and describe where the damp is and whether the tiles are still in place, so we can assess the situation before anything else.
- 2
Checking the floor and drain
We check the fall of the floor towards the drain and the condition of the junctions at the walls and the door threshold, to find where the protection is missing or has failed.
- 3
Preparing the surface and treating it
The work involves cleaning the base, closing cracks and sealing joints, then applying the waterproof layer over the full floor area and a suitable height up the walls.
- 4
Sealing the weak points
The drain, the door threshold and the corners where the wall meets the floor are the most vulnerable spots, and each is given particular care during application.
The floor is sealed and the room below stays dry
- We waterproof the full bathroom floor, not just part of it
- We seal the drain, the junctions and the door threshold
- We treat cracks before applying any layer
- We take your request by phone call or WhatsApp message
- Waterproofing starts under the tiles where it matters
The service in Ash Shi’bah
In a district like Ash Shi'bah, homes may be multi-storey, and a leak from an upper bathroom affects several floors below. Water leaks from water and drain pipes and around the floor drain, or through cracks in tiles and the cement layer. The bathroom and ceiling below are checked to trace the water, then the floor is cleaned of dust and trapped damp, all cracks and joints are treated, and the seal is applied. The first check determines whether the work is simple or extensive.
Ash Shi'bah is a district in Al-Ahsa governorate in the Eastern Province, close to Al Qurayn, Julayjilah and Ash Shuqayq.
Gaps around vertical drain pipes are the most common leak sources in multi-storey homes.
Our portfolio
What our customers say
- ★★★★★
شكرا على التواصل وصلو في اسرع وقت ممكن
- ★★★★★
ممتاز والخدمة ان شاء الله تكون قد التوقعات
- ★★★★★
شركه ممتاز شغلهم كويس ويعطيهم العافيه
Reviews are shown as the customers wrote them, in Arabic.
Questions about Bathroom floor waterproofing in Ash Shi’bah
No. Tiles do not waterproof on their own. Water finds its way through the drain opening, the wall junctions and any crack in the screed. The waterproof layer applied to the floor before or under the tiles is what stops water reaching the slab. Tiles finish the surface; they do not seal it.
Because both are points where the waterproof layer is interrupted. At the drain, the floor meets a metal ring that is hard to seal completely if the joint is not treated carefully. The door threshold is the boundary between a wet and a dry area, and if the waterproof layer does not reach it, water enters beneath it.
If the stain is directly on the ceiling below the bathroom and grows after repeated use, the floor is the more likely source. If damp appears on a neighbouring wall or in the corners of an adjacent room, the wall or the corner is more probable. Pinpointing the source accurately requires checking the floor surface, the junctions and the drain together.
The correct fall of the floor is a necessary complement to the waterproof layer. If the floor is flat or slopes away from the drain, water pools and presses on the layer at specific points, speeding up its failure. Waterproofing alone does not compensate for a poor fall, and a correct fall alone is not enough without a sound waterproof layer.
Tell us exactly where the damp appears: on the ceiling below, inside the bathroom, or both. Say whether the tiles are still in place or some have been removed, and whether the bathroom is in use or under construction. The clearer the information, the better we can judge what the floor needs before we visit.
Water appears on the ceiling directly below the bathroom. If the wet stain is directly under the bathroom, the source is there. But if the stain is wide or spread, the water may come from a deep drain pipe.
Waterproofing the bathroom floor stops water leaking through it, but if the lower walls are damp from another cause like salt or ground moisture, that needs separate treatment. The first check determines the source of each damp patch.
More services in Ash Shi’bah
