What cold bitumen waterproofing includes
- Checking the surface to be waterproofed and identifying the cracks and joints that need preparation
- Treating open cracks and joints before any coat is applied
- Cleaning the surface and removing dust and residue so the material bonds properly
- Applying cold bitumen by brush or roller in a continuous unbroken coat
- Special attention to edges, corners and the perimeter of drains as the most common points of seepage
- Covering small roofs, bathrooms and areas where a flame would be a risk
From your call to the waterproofing
- 1
Describe what you see
Call or message us on WhatsApp and tell us where the damp is or which surface you want waterproofed and roughly what size it is.
- 2
Preparing the surface
A good coat starts with a clean, dry surface free of open cracks; cracks are treated and residue removed before any application.
- 3
Applying the cold bitumen
The material is brushed or rolled onto the floor, the wall, the joints and the edges in a continuous unbroken coat, with no flame used at any stage.
- 4
Joints and edges first
The joints between the wall and the floor and the edges around the drains are the most exposed points, so they receive special attention during application.
Why cold bitumen suits your situation
- No flame and no heat at any stage of application
- Suits bathrooms, confined spaces and small surfaces
- Reaches the joints and edges that rolls cannot cover
- We check and prepare the surface before coating
- We take your request by phone call or WhatsApp message
The service in Ash Shuruq
In a residential district like Ash Shuruq, bathrooms, kitchens and areas where water is used often need protection from damp and leaks into walls and floors. Cold bitumen is applied after the surface is cleaned and completely dry, covering all cracks, joints and corners. This method suits places that are hard to spray or tight spaces. The area is inspected first to see the damp source, cracks and damage that may need repair before waterproofing.
Ash Shuruq is a district in Al-Ahsa governorate in the Eastern Province, close to Al Muruj, Al Yasmin and Ar Rabie.
The first inspection of a bathroom or kitchen finds the water source, cracks and old damp that must be treated before bitumen is applied.
Our portfolio
What our customers say
- ★★★★★
شركة ممتازة تستحق التعامل معها بشكل مستمر
- ★★★★★
شكرا على التواصل السريع
- ★★★★★
شركه ممتاز شغلهم كويس ويعطيهم العافيه
Reviews are shown as the customers wrote them, in Arabic.
Questions about Cold bitumen waterproofing in Ash Shuruq
Bitumen rolls are heat-welded with a direct flame and are mostly used on large open roofs. Cold bitumen is a liquid material brushed or rolled on with no flame, which makes it the better choice in confined spaces, bathrooms and surfaces where a flame is a risk or simply not practical.
Cold bitumen bonds well to concrete, brick, tiles and some metal surfaces once they are prepared. It does not suit very smooth or moving surfaces such as timber that expands and contracts widely, as it may not keep continuous contact with the surface in those cases.
Yes, and it is one of its common uses. The material is applied to the floor and the lower part of the wall with special care at the joints and corners, and left to dry before tiling. The surface must be clean and free of open cracks before work begins.
Yes, and that is its main advantage. In enclosed spaces, near flammable materials or where electrical runs are exposed, cold bitumen is the safer choice because it needs no heat source or flame at any stage of its application.
Tell us the type of surface you want waterproofed, whether it is a bathroom floor, a small roof or a wall, and whether there is visible damp now or you are waterproofing before construction. Describe the approximate area and any cracks or joints you think are the source of the problem. The clearer your description, the easier our assessment.
Clean the kitchen well of grease and dirt, and mention if you see damp stains on the floor or walls or a musty smell, and send a photo on WhatsApp if you can.
Cold bitumen protects against damp from water and bathing, but the bathroom must first be inspected to know whether the damp is from a pipe leak or normal use.
More services in Ash Shuruq
Cold bitumen waterproofing in nearby areas
