Al Raya
Pool waterproofing in As Sunaidah District: An empty pool shell with a grey waterproof coat on the floor and tiles ready at the edge

Pool waterproofing in As Sunaidah District

In As Sunaidah District, family homes rely on pools to beat the summer heat, and leaks from the pool floor or walls waste water and weaken the structure. Al Raya finds the leak by checking the waterproof layer under the tiles and the joints, and restores protection with strong waterproofing.

How we work

How the waterproofing job goes

  1. 1

    Tell us what you see

    Call or WhatsApp us and describe the pool: is it new and not yet tiled, or existing and tiled, and where the problem appears.

  2. 2

    Locate the fault

    We check the shell, the joints and the pipe openings to find where the leak is before choosing a material or method.

  3. 3

    Prepare the surface and treat it

    The surface is cleaned and prepared, and cracks and joints are sealed before the waterproof layer goes on, because the layer only works on a ready surface.

  4. 4

    Complete the work and refill

    After the waterproof layer is complete on the walls, floor, joints and openings, the pool is refilled with water.

Why Al Raya

This fault can be treated

  • We waterproof pools from the inside without demolition
  • We treat the concrete shell, joints and pipe openings
  • We locate the fault before choosing a material
  • We take your request by phone call or WhatsApp message
  • We work on new pools and existing pools alike
About the area

The service in As Sunaidah District

Pools in homes in As Sunaidah District are usually rectangular with tiled floor and walls, and water tends to find any crack in the waterproof layer or a joint between tiles. Leaks often show first on the pool's outer walls, where you see damp below the tiles or stains on the foundations. Technicians check the tiled surface, the joints and the corners, then decide if the fault is in the waterproof layer itself or in cracked tiles, and then choose the right treatment to ensure the leak does not return.

As Sunaidah District is a district in Al-Ahsa governorate in the Eastern Province, close to Munifah District, Ar Rafiah District and Al Marbidia District.

The joints between tiles and the lower corners of the pool are where leaks most often begin.

Read about Pool waterproofing

Our work

Our portfolio

  • Damp stains and damage on a ceiling beside a wall light
  • A hand scraping damp mortar from between small stones on a surface
  • Peeling paint on an exterior wall beside a pipe
  • Cracked and bubbling paint along a wall edge
  • A white roof with an air conditioner and satellite dishes
  • A leak detection device with headphones in a case
Reviews

What our customers say

  • ★★★★★

    شركه ممتازه

  • ★★★★★

    ممتاز والخدمة ان شاء الله تكون قد التوقعات

  • ★★★★★

    شكرا على التواصل السريع

Reviews are shown as the customers wrote them, in Arabic.

Questions

Questions about Pool waterproofing in As Sunaidah District

Not necessarily either. Loss can come from a crack in the concrete shell, an expansion joint, a pipe opening in the wall, or a buried pipe line. A simple test such as marking the water level and stopping the pump helps narrow down the possibilities before inspection.

Before tiling, the concrete shell is open and the waterproof layer goes directly on the concrete before the tiles come on top. After tiling, the original layer under the tiles has failed, and the treatment options differ depending on whether the tiles need to come off. Each case has its own dedicated service with full details.

The main signs are a regularly falling water level without a clear reason for evaporation, damp patches on the outer pool wall, cracking or detaching tiles, or white deposits on the inner surface showing that water is moving through the concrete and carrying its salts with it.

In some cases yes: joints between tiles can be treated, visible cracks sealed and a waterproof coat applied over the existing tiles. But if tiles are detached from the layer beneath or damaged, removing them becomes necessary to reach and treat the concrete shell. That is determined after inspection.

Concrete expands and contracts with temperature change, and joints are where the pool is designed to move; if they are not treated with a flexible material they crack. Pipe openings are weak points because the concrete around them is never fully bonded to the pipe, so water finds its way through if they are not properly sealed.

Common materials include cementitious waterproof coatings, suitable for application on concrete before and after tiling; epoxy coatings, a resin that hardens into a rigid barrier resistant to water and chemicals; and polyurethane foam in specific cases. The choice of material depends on the shell's condition, the pool's age and whether it is tiled or not.

Tell us whether the pool is new and not yet tiled or existing and tiled, and whether you notice a falling water level, damp on the outer wall or visible cracks in the tiles or concrete. If the pool is in use, give us an idea of its size. These details help us identify which option suits your case.

Unusual drop in water level within days, damp below the tiles inside, and wet stains on the foundation around the pool outside all point to a fault in the waterproof layer or the joints.

Say when you first noticed the water dropping, whether damp stains are near one corner or spread across the walls, and send a photo of the wet area on WhatsApp to help with the first check.

Nearby areas

Pool waterproofing in nearby areas

Sunset over villa roofs and palm trees

Contact us about your pool

Call or WhatsApp us and describe your pool's condition.

Call nowWhatsApp