Al Raya
Overhead tank waterproofing in Al Kilabiyah: An elevated concrete tank on columns with a damp patch at its base

Overhead tank waterproofing in Al Kilabiyah

Waterproofing an overhead tank in Al Kilabiyah cuts off the water before it drips onto the ceiling and furniture. Al Raya treats the concrete tank walls and base inside and out with strong waterproof materials.

What the service includes

What overhead tank waterproofing includes

  • Inspecting the inner concrete walls of the tank and identifying cracks and weak joints
  • Inspecting the tank base and the concrete stand and tracing the water's path to the roof or ceiling
  • Treating cracks and preparing the surface before any waterproofing coat is applied
  • Waterproofing the inner walls with a material suited to concrete in contact with water
  • Waterproofing the outer walls and the base to stop damp reaching the roof slab and ceiling
  • Treating the tank stand where it is a path for damp to travel downward
How we work

From your call to the treated tank

  1. 1

    Describe what you see

    Call or message us on WhatsApp and tell us where the damp appears: on the ceiling below the tank, around the base on the roof, or on the outer walls of the tank.

  2. 2

    Checking the tank and the base

    We inspect the inner and outer walls of the tank, the base and the stand, to trace the water and find where cracks form or a joint has weakened.

  3. 3

    Preparing the surface and treating it

    Preparing the surface is a core part of the job: the walls are cleaned and cracks are treated before the waterproofing coat goes on, because a coat on an unprepared surface will not hold.

  4. 4

    Waterproofing inside and out

    The walls are waterproofed inside to stop water passing through the concrete, and the base and outer walls are waterproofed to protect the roof and the ceiling below from accumulated damp.

Why Al Raya

Why you can feel at ease about this work

  • We find the source of the leak before any treatment
  • We treat the walls and the base inside and out
  • Cracks are treated before the waterproofing coat
  • Materials suited to overhead concrete tanks
  • We take your request by phone call or WhatsApp message
About the area

The service in Al Kilabiyah

In a town like Al Kilabiyah, overhead tanks need ongoing care, because concrete cracks as heat and humidity change, and water seeps through even tiny cracks. Joints around the fill and drain holes and seams between tank sections are common leak spots. The team inspects carefully, finds the leak source, cleans off dirt and deposits, treats cracks, then applies waterproof layers that stop water getting in.

Al Kilabiyah is a town in Al-Ahsa governorate in the Eastern Province.

A leak from the tank base is more harmful than one from the walls, because it falls straight onto the ceiling and rooms below.

Read about Overhead tank waterproofing

Our work

Our portfolio

  • Cracked and bubbling paint along a wall edge
  • A white roof with an air conditioner and satellite dishes
  • A leak detection device with headphones in a case
  • The edge of a roof insulated in white beside a building under a clear sky
  • A roof covered in a smooth white insulation layer with a small dome behind it
  • A hole in a broken wall exposing pipes and wires
Reviews

What our customers say

  • ★★★★★

    شكراً لخدمتك الجميلة

  • ★★★★★

    شغلهم نظيف وسريعين ومحترمين الله يعطيهم العافيه

  • ★★★★★

    شركة ممتازة تستحق التعامل معها بشكل مستمر

Reviews are shown as the customers wrote them, in Arabic.

Questions

Questions about Overhead tank waterproofing in Al Kilabiyah

In most cases no, because damp that builds up on the outer wall of the tank or under its base reaches the roof and the ceiling below without passing through the inside. So the work usually covers the outer walls and the base as well as the inner treatment.

Water travels horizontally under the concrete before it appears on the ceiling surface, so the stain's position does not have to match the source. The source is often the tank base or an expansion joint, and the mark shows elsewhere. That is why the work starts by tracing the source.

The tank stand receives water leaking from the base and the lower walls, and over time cracks form in it and the concrete deteriorates from repeated damp. Treating the stand is part of treating the overhead tank when it is the water's path to the roof.

An expansion joint is a deliberate gap left in the concrete to absorb movement with heat and cold changes; it is relatively wide with regular edges. A shrinkage crack forms from unexpected settlement or contraction and has an irregular shape. Both are possible leak paths and need treatment before waterproofing.

Tell us exactly where the damp shows: on the ceiling below the tank, around its base on the roof, or on its outer walls. Tell us whether it is a concrete tank and whether the damp appears constantly or only after the tank is filled. These details help us gauge the scope of the work.

Seeping from the base means the concrete has absorbed water or there is a small crack. The team treats the base inside and out, fills cracks with epoxy, and applies a waterproof coating to stop water entering from the ground.

Notice where stains appear on the ceiling, whether water is damp or dripping, and if there is a musty smell. If possible, photograph the tank inside and out. These observations help the team understand the problem before they visit.

Nearby areas

Overhead tank waterproofing in nearby areas

Sunset over villa roofs and palm trees

Call and we trace the source with you

WhatsApp or call us and describe where the damp appears around your tank.

Call nowWhatsApp